Quotes About Design

On the capitals of both pillars, just above the rounded projection next to the network, were the two hundred pomegranates in rows encircling each capital.

And the tops of the pillars were shaped like lilies. So the work of the pillars was completed.

He also made the Sea of cast metal. It was circular in shape, measuring ten cubits from rim to rim, five cubits in height, and thirty cubits in circumference.

Below the rim, ornamental buds encircled it, ten per cubit all the way around the Sea, cast in two rows as a part of the Sea.

It was a handbreadth thick, and its rim was fashioned like the brim of a cup, like a lily blossom. It could hold two thousand baths.

In addition, he made ten movable stands of bronze, each four cubits long, four cubits wide, and three cubits high.

This was the design of the stands: They had side panels attached to uprights,

and on the panels between the uprights were lions, oxen, and cherubim. On the uprights was a pedestal above, and below the lions and oxen were wreaths of beveled work.

Each stand had four bronze wheels with bronze axles and a basin resting on four supports, with wreaths at each side.

The opening to each stand inside the crown at the top was one cubit deep, with a round opening like the design of a pedestal, a cubit and a half wide. And around its opening were engravings, but the panels of the stands were square, not round.

There were four wheels under the panels, and the axles of the wheels were attached to the stand; each wheel was a cubit and a half in diameter.

The wheels were made like chariot wheels; their axles, rims, spokes, and hubs were all of cast metal.

Each stand had four handles, one for each corner, projecting from the stand.

At the top of each stand was a circular band half a cubit high. The supports and panels were cast as a unit with the top of the stand.

In this way he made the ten stands, each with the same casting, dimensions, and shape.

He set five stands on the south side of the temple and five on the north, and he put the Sea on the south side, at the southeast corner of the temple.

the two pillars; the two bowl-shaped capitals atop the pillars; the two sets of network covering both bowls of the capitals atop the pillars;

the four hundred pomegranates for the two sets of network (two rows of pomegranates for each network covering both the bowl-shaped capitals atop the pillars);

The throne had six steps, and its back had a rounded top. There were armrests on both sides of the seat, with a lion standing beside each armrest.

Then David gave his son Solomon the plans for the portico of the temple, its buildings, storehouses, upper rooms, inner rooms, and the room for the mercy seat.

The plans contained everything David had in mind for the courts of the house of the LORD, for all the surrounding rooms, for the treasuries of the house of God and of the dedicated things,

He is the son of a woman from the daughters of Dan, and his father is a man of Tyre. He is skilled in work with gold and silver, bronze and iron, stone and wood, purple, blue, and crimson yarn, and fine linen. He is experienced in every kind of engraving and can execute any design that is given him. He will work with your craftsmen and with those of my lord, your father David.

The foundation that Solomon laid for the house of God was sixty cubits long and twenty cubits wide, according to the old standard.

The portico at the front, extending across the width of the temple, was twenty cubits long and twenty cubits high. He overlaid the inside with pure gold.